Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Uchibori, Akihiro; Doda, Norihiro; Aoyagi, Mitsuhiro; Sonehara, Masateru; Sogabe, Joji; Okano, Yasushi; Takata, Takashi*; Tanaka, Masaaki; Enuma, Yasuhiro; Wakai, Takashi; et al.
Nuclear Engineering and Design, 413, p.112492_1 - 112492_10, 2023/11
Times Cited Count：1 Percentile：68.31(Nuclear Science & Technology)The ARKAIDA has been developed to realize automatic optimization of plant design from safety evaluation for the advanced reactors represented by a sodium-cooled fast reactor. ARKADIA-Design offers functions to support design optimization both in normal operating conditions and design basis events. The multi-level simulation approach by the coupled analysis such as neutronics, core deformation, core thermal hydraulics was developed as one of the main technologies. On the other hand, ARKAIDA-Safety aims for safety evaluation considering severe accidents. As a key technology, the numerical methods for in- and ex-vessel coupled phenomena during severe accidents in sodium-cooled fast reactors were tested through a hypothetical severe accident event. Improvement of the ex-vessel model and development of the AI technology to find best design solution have been started.
Yoshimura, Kazuo; Doda, Norihiro; Nakamine, Yoshiaki*; Fujisaki, Tatsuya*; Igawa, Kenichi*; Iida, Masaki*; Tanaka, Masaaki
Dai-27-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 5 Pages, 2023/09
In Japan Atomic Energy Agency, a virtual plant model of the sodium-cooled fast reactor plant composed in a computer is being developed to reduce the development cost, by replacing the experiments to the numerical simulations with coupled analyses of the physical phenomena accounting for the interaction between components under various plant conditions. Through the numerical analysis of the ULOHS test in the U.S. experimental fast reactor named EBR-II, applicability of the virtual plant model was confirmed in comparison with the measured data including the core inlet temperature and the reactor power.
Ohshima, Hiroyuki; Asayama, Tai; Furukawa, Tomohiro; Tanaka, Masaaki; Uchibori, Akihiro; Takata, Takashi; Seki, Akiyuki; Enuma, Yasuhiro
Journal of Nuclear Engineering and Radiation Science, 9(2), p.025001_1 - 025001_12, 2023/04
This paper describes the outline and development plan for ARKADIA to transform advanced nuclear reactor design to meet expectations of a safe, economic, and sustainable carbon-free energy source. ARKADIA will realize Artificial Intelligence (AI)-aided integrated numerical analysis to offer the best possible solutions for the design and operation of a nuclear plant, including optimization of safety equipment. State-of-the-art numerical simulation technologies and a knowledge base that stores data and insights from past nuclear reactor development projects and R&D are integrated with AI. In the first phase of development, ARKADIA-Design and ARKADIA-Safety will be constructed individually, with the first target of sodium-cooled reactor. In a subsequent phase, everything will be integrated into a single entity applicable not only to advanced rectors with a variety of concepts, coolants, configurations, and output levels but also to existing light-water reactors.
Doda, Norihiro; Yoshimura, Kazuo; Hamase, Erina; Yokoyama, Kenji; Uwaba, Tomoyuki; Tanaka, Masaaki
Proceedings of Technical Meeting on State-of-the-art Thermal Hydraulics of Fast Reactors (Internet), 3 Pages, 2022/09
ARKADIA-Design is being developed to support the optimization of sodium-cooled fast reactors in the conceptual design stage. Design optimization requires various types of numerical analysis: 1-D plant dynamics analysis for efficient evaluation of various design options and multi-dimensional analysis for a detailed evaluation of local phenomena, including multi-physics. For those analyses, ARKADIA-Design performs whole plant analyses based on the multi-level simulation (MLS) technique in which the analysis codes are coupled to simulate the phenomena in an intended degree of resolution. This paper describes an outline of the coupling analysis methods in the MLS of the ARKADIA-Design and the numerical simulations of the experimental fast breeder reactor EBR-II tests by the coupled analysis.
Kato, Atsushi; Yamamoto, Tomohiko; Ando, Masato; Chikazawa, Yoshitaka; Murakami, Hisatomo*; Oyama, Kazuhiro*; Kaneko, Fumiaki*; Higurashi, Koichi*; Chanteclair, F.*; Chenaud, M.-S.*; et al.
EPJ Nuclear Sciences & Technologies (Internet), 8, p.11_1 - 11_10, 2022/06
This paper provides an overview of plant system studies to establish a common technical view for Sodium-cooled Fast Reactor concept between France and Japan based on ASTRID600 and the new concept with downsized output called ASTRID150. One of important issues on a reactor structure design is to enhance seismic resistance to be tolerable against strong earthquake such that postulated in Japan. A concept of High Frequency Design is shared, and the design options related to HFD have been examined and design recommendations are established. In addition, this paper include results of studies for a steam generator, a decay heat removal system, a fuel handling system and a containment vessel.
Doda, Norihiro; Hamase, Erina; Kikuchi, Norihiro; Tanaka, Masaaki
Proceedings of International Conference on Fast Reactors and Related Fuel Cycles; Sustainable Clean Energy for the Future (FR22) (Internet), 10 Pages, 2022/04
In conventional design studies of sodium-cooled fast reactors, plant dynamics and local phenomena were evaluated separately by using simple models and detailed models, respectively, and their interaction was considered through the boundary conditions settings with conservativeness for each individual analysis. Thus, the final result through the analyses may contain excessive conservativeness. Therefore, JAEA began to develop a multi-level simulation system in which detailed analysis codes are coupled with a plant dynamics analysis code. Focusing on core thermal-hydraulics, a coupled analysis method using a plant dynamics analysis code Super-COPD and a subchannel analysis code ASFRE has been developed. The analysis on a test in the experimental fast reactor EBR-II was performed to validate the coupled analysis. Through the comparison of the analysis results and the measurement, it was confirmed that the coupled analysis could predict the transient temperature distribution in the subassembly, and the multi-level simulation by changing the level of detail in analysis model could be performed for core thermal-hydraulics.
Doda, Norihiro; Uwaba, Tomoyuki; Nemoto, Toshiyuki*; Yokoyama, Kenji; Tanaka, Masaaki
Keisan Kogaku Koenkai Rombunshu (CD-ROM), 26, 4 Pages, 2021/05
For design optimization of fast reactors, in order to consider the feedback reactivity due to thermal deformation of the core when the core temperature rises, which could not be considered in the conventional design analysis, a neutronics, thermal-hydraulics, and structure mechanics coupled analysis method has been developed. Neutronics code, plant dynamics code, and structural mechanics code are coupled by a control module in python script. This paper outlines the coupling method of analysis codes and the results of its application to an experiment in an actual plant.
Doda, Norihiro; Hamase, Erina; Yokoyama, Kenji; Tanaka, Masaaki
Keisan Kogaku Koenkai Rombunshu (CD-ROM), 25, 4 Pages, 2020/06
With the aim of advancing the design optimization in fast reactors, neutronics and thermal-hydraulics coupled analysis method which can consider the temporal change of neutron flux distribution in the core has been developed. A three-dimensional neutronics analysis code and a plant dynamics analysis code are coupled on a platform using Python programing. In this report, outlines of the coupling method of analysis codes, the results of its application to the actual plant under a virtual accidental condition, and the future development is described.
Nakajima, Norihiro; Aoki, Keiko*
Tokyo Daigaku Jinkobutsu Kogaku Kenkyu Senta 2017-Nendo Kenkyu Nempo, p.51 - 53, 84, 2018/12
Visiting professors research division in the Research into Artifacts, Center for Engineering (RACE) has been conducting research collaboration in Socio-Artifactology and Human-Artifactology, in order to establish the methodology of the fusion research in sociology and science for artifacts engineering for the third era activity of RACE. The division decided to observe how the methodology works in applications with social experiments and numerical experiments for 2017.
secondary system and turbomachineryHumrickhouse, P. W.*; Sato, Hiroyuki; Imai, Yoshiyuki; Sumita, Junya; Yan, X.
Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 9 Pages, 2018/10
This work describes the development of a RELAP5-3D model of the HTTR-GT/H plant secondary system. The RELAP5-3D model presently includes detailed models of several of the heat exchangers in the secondary system as well as the turbomachinery, which includes two compressors and two gas turbines connected to a common shaft and motor. The predictions of the model agreed well to design parameters in both sole power generation and hydrogen co-generation modes in most instances. Both the turbomachinery and heat exchanger models rely on extensive customization via RELAP5-3D control variables, and these implementations are outlined in detail. Potential improvements to the RELAP5-3D turbine model are discussed.
Hamase, Erina; Doda, Norihiro; Nabeshima, Kunihiko; Ono, Ayako; Ohshima, Hiroyuki
Nihon Kikai Gakkai Rombunshu (Internet), 83(848), p.16-00431_1 - 16-00431_11, 2017/04
A plant dynamics analysis code Super-COPD is being developed in JAEA for the design and safety assessments of sodium-cooled fast reactors (SFRs). In this study, the friction loss coefficients in the whole core thermal-hydraulic model was modified to improve the prediction accuracy of the sodium temperature distribution in a fuel subassembly under the natural circulation conditions. The modified whole core model was applied to analyses of experiments that were performed by using JAEA's test facility PLANDTL as a part of the code validation study. The obtained numerical results of sodium temperature distributions in the core showed good agreement with the measured data. It implies that the modified whole core model can properly reproduce dominant thermal-hydraulic phenomena in the core region under natural circulation conditions, i.e., flow redistribution among fuel subassemblies as well as in a fuel subassembly and inter-subassembly heat transfer.
Nishimura, Akihiko; Takenaka, Yusuke*
Sumato Purosesu Gakkai-Shi, 6(2), p.74 - 79, 2017/03
no abstracts in English
Uchida, Shunsuke; Hanawa, Satoshi; Lister, D. H.*
Power Plant Chemistry, 17(6), p.328 - 339, 2015/12
In nuclear power plants, radiation makes the relationship between structural materials and water chemistry much more complex than that in fossil fueled power plants. It is difficult to maintain safer and more reliable plant operation by controlling water chemistry based on only a restricted number of measured data. It is often required to control water chemistry with suitable assistance from computer models, which can extrapolate measured water chemistry parameters to those at the required locations and predict future trends of the interactions between structural materials and water chemistry. In the paper, water chemistry control based on parameters determined with plant simulation models and major computational models to be applied for water chemistry control are discussed.
Fast Breeder Reactor Research and Development Center, Tsuruga Head Office
JAEA-Review 2014-030, 138 Pages, 2014/08
JAEA-Review-2014-030.pdf:71.69MB
The prototype fast breeder reactor Monju has accumulated technical achievements in order to establish the fast breeder reactor cycle technology in Japan using the operation and maintenance experience, etc. This annual report summarizes the primary achievements and the data related to the plant management in Monju during fiscal 2013.
Saito, Shigeru; Tsujimoto, Kazufumi; Kikuchi, Kenji; Kurata, Yuji; Sasa, Toshinobu; Umeno, Makoto*; Nishihara, Kenji; Mizumoto, Motoharu; Ouchi, Nobuo; Takei, Hayanori; et al.
Nuclear Instruments and Methods in Physics Research A, 562(2), p.646 - 649, 2006/06
Times Cited Count：25 Percentile：83.89(Instruments & Instrumentation)JAERI is conducting R&D on the Accelerator Driven System (ADS) to transmute minor actinides (MAs) contained in the high-level radioactive waste under the OMEGA (Options Making Extra Gains from Actinides and fission products) program. The present study discusses the design of the ADS plant and various R&D on the ADS. The reference design of ADS plant in JAERI is the 800 MWth, Pb-Bi eutectic (LBE) cooled, tank-type subcritical reactor loaded with (MA+Pu) nitride fuel. LBE is selected as a spallation target material. In our results of the optimization study on the neutronics of the ADS, we have adopted the maximum multiplication factor (k
) of 0.97. From the results of the thermal-hydraulic analysis around the LBE spallation target, partition wall and flow control nozzle are required to keep the structural integrity around the core and the beam window. Feasibility of beam window was also discussed for transient conditions of proton beam.
Nishi, Masataka; Yamanishi, Toshihiko; Hayashi, Takumi; DEMO Plant Design Team
Fusion Engineering and Design, 81(1-7), p.745 - 751, 2006/02
Times Cited Count：32 Percentile：88.03(Nuclear Science & Technology)The fusion DEMO plant is under designing at JAERI as a fusion machine following ITER, and it is designed with long-term steady operation and tritium breeding blanket in which more tritium is produced than consumption. Therefore, proper tritium accountancy control concept should be discussed and developed for its safety and operation. From the viewpoint of regulation for the radioisotopes, at first, it will be suitable to divide facilities of the fusion DEMO plant into three accountancy control blocks, that is, (1) the contaminated waste management facility, (2) the long term tritium storage facility, and (3) the fuel processing plant. In each block, tritium amount of receipt and delivery should be carefully accounted. The fuel processing plant involves tritium production in the blanket, therefore proper accounting method for produced tritium should be established. Furthermore, dynamic accountancy is indispensable to the fuel processing plant to monitor tritium inventory distribution for safety and optimum system control in addition to the accountancy under regulation.
Nakamura, Hirofumi; Sakurai, Shinji; Suzuki, Satoshi; Hayashi, Takumi; Enoeda, Mikio; Tobita, Kenji; DEMO Plant Design Team
Fusion Engineering and Design, 81(8-14), p.1339 - 1345, 2006/02
Times Cited Count：51 Percentile：94.72(Nuclear Science & Technology)no abstracts in English
Sato, Masayasu; Sakurai, Shinji; Nishio, Satoshi; Tobita, Kenji; Inoue, Takashi; Nakamura, Yukiharu; Shinya, Kichiro*; Fujieda, Hirobumi*; DEMO Plant Design Team
Fusion Engineering and Design, 81(8-14), p.1277 - 1284, 2006/02
Times Cited Count：14 Percentile：68.04(Nuclear Science & Technology)no abstracts in English
Tobita, Kenji; Nishio, Satoshi; Enoeda, Mikio; Sato, Masayasu; Isono, Takaaki; Sakurai, Shinji; Nakamura, Hirofumi; Sato, Satoshi; Suzuki, Satoshi; Ando, Masami; et al.
Fusion Engineering and Design, 81(8-14), p.1151 - 1158, 2006/02
Times Cited Count：124 Percentile：99.05(Nuclear Science & Technology)no abstracts in English
Nishio, Satoshi; Omori, Junji*; Kuroda, Toshimasa*; Tobita, Kenji; Enoeda, Mikio; Tsuru, Daigo; Hirose, Takanori; Sato, Satoshi; Kawamura, Yoshinori; Nakamura, Hirofumi; et al.
Fusion Engineering and Design, 81(8-14), p.1271 - 1276, 2006/02
Times Cited Count：20 Percentile：78.77(Nuclear Science & Technology)The design guideline for the blanket is decided to meet the mission of the DEMO plant which is expected to use technologies to be proven by 2020 and present an economical prospect of fusion energy in the operational time of the reactor. To moderate the technological extrapolation, the structural material of reduced activation ferritic steel (F82H), ceramic tritium breeder of LiTiO
and neutron multiplier of Be are introduced. To improve the economical aspect, the coolant material of the supercritical water with inlet/outlet temperatures of 280/510
C, coolant pressure of 25 MPa is chosen. Resultantly the thermal efficiency of 41% is achieved. To obtain higher plasma performance, MHD instabilities suppressing shell structure is adopted with structural compatibility to the blanket structure. To meet higher plant availability requirement (more than 75%), the hot cell maintenance approach is selected for the replaceable power core components.
